No sourcing channel is free of counterfeit electronic components risk, and the people who find fakes are mostly buyers and test labs, not the manufacturers whose names are on the parts. ERAI’s 2025 data shows that 36.15% of reported parts were still active products, 81.1% had never been reported before, and the companies that make the components made only 4.02% of the reports. This guide shows how fakes reach buyers, how much risk each purchasing channel carries, which standards cover each one, and what to ask a supplier before you buy.
Key Takeaways
- Buying only obsolete parts from unknown sellers is not the whole risk. Active parts made up 36.15% of the parts reported to ERAI in 2025.
- A part not appearing on a warning list proves little. 81.1% of parts reported in 2025 were first-time reports.
- Independent distributors (48.26%) and third-party test labs (32.17%) made most of the 2025 reports, so the detection burden sits with the buyer and the people they pay to test.
- The less you can trace a part back to the manufacturer, the more testing it needs. The AS6171 test methods standard applies when the chain of custody is unknown or the part comes from a broker or independent distributor.
Who actually finds counterfeit components?
ERAI collects reports of suspect counterfeit and nonconforming parts from companies across the industry. In its 2025 annual report, 748 parts were reported, and the organisations that reported them were mostly the ones that buy, sell and test parts.
Reporting is voluntary, so the chart shows who looks and who shares, not who sells. Our reading is a practical one: the manufacturer rarely sees the suspect part, so nobody upstream will catch it for you. Whether a lot is genuine is the buyer’s question, answered by traceability and testing, not by the name printed on the package.
How do counterfeit components reach buyers?
Fakes usually arrive as re-marked lower-grade parts, salvaged parts sold as new, clones built on a different die, or rejected stock that should have been scrapped. Which of these you meet depends more on where you buy than on what you buy. Our guide to detecting counterfeit components maps each type to the test that catches it.
How much risk does each purchasing channel carry?
The table below ranks channels by how much you can verify yourself. It is our suggestion for a starting point, not a requirement of any standard. Your contract or customer may require more.
| Where the parts come from | What you can verify | Suggested minimum |
|---|---|---|
| The manufacturer or an authorised distributor | Direct pedigree to the manufacturer. AS6496 sets the counterfeit controls an authorised distributor is expected to run. | Check packaging, labels and paperwork on receipt, and keep the records. |
| An independent distributor or broker | Only what the seller’s own process supports. ARP6178A is a tool for assessing such a supplier, and AS6081A sets distributor practices. | Assess the supplier before you buy. Test the lot, because the chain of custody back to the manufacturer is not guaranteed. |
| Surplus or excess stock from another company | The original purchase trail, if the holder can produce it. | Ask for the invoice trail back to the manufacturer or authorised source, then test according to risk. |
| An online marketplace or unvetted seller | Usually nothing you can independently check. | Avoid for production parts. If unavoidable, agree a full test plan and a right of return before you pay. |
Reclaimed stock sold as new is a counterfeit however clean it looks. Genuine reclaimed parts should be described as such. Our component reclaim and recovery page explains the legitimate version of the process.
Why is avoiding obsolete parts not enough?
Many buyers assume parts still in production are safe. ERAI’s 2025 data contradicts that. Obsolete parts were still the most reported, at 60.02%, but active parts accounted for 36.15%, and ERAI notes these were available through authorised channels when the problem was found.
Warning lists are not a safety net either. Of the parts reported in 2025, 81.1% were new occurrences and only 18.9% had been reported before, and 10.1% belonged to brands never reported before. A part that has never appeared on a list has not been cleared.
Which standards cover which part of the problem?
SAE publishes a family of standards that split the work by role. The scope notes below come from the ERAI standards list, which links to each standard for purchase. Systemation Euro does not claim certification to any of them.
- AS5553: for organisations that buy and integrate electronic parts. Its mitigation steps are risk-based, so they vary with how critical the application is.
- AS6081 and AS6496: distributor standards. AS6081 covers independent distribution and AS6496 covers authorised distribution.
- ARP6178A: a tool for assessing a supplier that is not an authorised source.
- AS6171: test methods, for use once parts have an unknown chain of custody or come from a broker or independent distributor. Our guide to the AS6171 standard explains how its techniques fit together.
- Defence Standard 05-135 Issue 2: the UK Ministry of Defence standard on avoiding counterfeit materiel, covering purchasing, test and verification, nonconforming materiel and reporting.
- IDEA-STD-1010-B: visual acceptance criteria for components traded on the open market.
What should you check before you buy?
None of these signs proves a part is fake, and a clean result proves nothing. They are reasons to slow down and test, and they come from common buying practice rather than from a standard.
- A price well below what the authorised channel charges.
- A lead time far shorter than the manufacturer quotes for the same part.
- No traceability back to the manufacturer, or a certificate of conformance as the only paperwork. A certificate is the seller’s statement, so it is only as reliable as the seller and the chain behind it.
- Date codes, lot codes or packaging that do not match each other or the manufacturer’s labelling.
- A seller who will not allow third-party testing or agree a return if the lot fails.
Where does testing fit?
Testing is the step that does not depend on trusting the seller. The less traceable the part, the more of it you need: visual inspection on lots with a good paper trail, up to X-ray, XRF and decapsulation for open-market parts going into high-reliability products. ERAI’s data supports layering, because 24% of the suspect counterfeit parts it examined passed electrical testing.
Systemation Euro’s counterfeit component testing service covers visual inspection, XRF, X-ray, decapsulation and die analysis, ionic contamination, solderability, curve trace electrical and heated solvent testing, carried out within our ISO 9001:2015 quality system, certified and audited by UKAS. If your contract requires testing to a specific accredited scope, tell us when you request a quote so we can confirm what we can and cannot supply. See also quality control and open market versus franchised distribution.
Frequently Asked Questions
Where do most counterfeit electronic components come from?
No public data gives a reliable split by country or seller. ERAI records what was reported, by whom and about which parts. Its 2025 report shows that 61.39% of reports came from organisations outside the United States, which shows the problem is global, not where fakes are made.
Is buying only from authorised distributors enough?
It lowers the risk and gives you a traceable chain, but it is not a guarantee. AS6496 sets expectations for authorised distributors, so you can ask for evidence of their controls. Keep your own receiving checks in place for high-reliability products.
How do I assess an independent distributor?
Ask for their documented counterfeit avoidance process and how they handle suspect parts. ARP6178A is a tool for assessing a non-authorised supplier, AS6081A sets distributor practices, and AS6301A gives criteria used to certify compliance with AS6081A. Also ask whether they allow third-party testing and agree a return if a lot fails.
What should I do if I find a suspect part?
Quarantine the lot, record the part number, lot and date code, and keep the evidence. Tell the supplier, and follow any reporting requirements in your contract. ERAI accepts reports from any organisation, whether or not it is a member, and does not publish the identity of the reporting company.
Sources: ERAI 2025 Annual Report; ERAI list of counterfeit avoidance standards. ERAI figures are self-reported and are not independently verified. Standards are summarised from the scope notes on that list, so buy the documents for exact requirements.







