Contract taping and reeling of ICs, passives and specialist components to EIA-481-D, from 13 taping centres in Northampton, with 500+ carrier tape variants in stock and same-day turnaround as standard.
Submit your details to connect with our team.
Tape and reel is the standard way to package surface mount components for automatic placement. Each component sits in its own pocket in a carrier tape, sealed with a cover tape and wound onto a reel that loads straight onto a pick-and-place feeder. A tape and reel service transfers loose, tubed or trayed parts into that format, built to EIA-481-D.
Carrier tape from 4 mm to 200 mm wide, with component spacing from 2 mm, on 7 inch reels for small parts and 13 inch reels for larger ones.
More than 500 carrier tape variants in stock, quick access to a further 1,000, and bespoke carrier tape made to match your component when nothing standard fits.
Semi-automatic and fully automatic taping machines, including systems with 3D vision checking lead position and pitch, to keep defect rates low.
Bulk components fed from a bowl feeder, or sensitive leaded parts taken straight from trays or antistatic tubes.
Same-day turnaround as standard, with 24/7 support when a production line is waiting for parts.
Devices can be programmed, taped and reeled, laser marked and dry packed under one job number, so there is one supplier and one set of records.
Five steps from loose parts to reels ready for your feeders.
Send the part number, package, quantity, input format and any tape, reel or orientation requirements.
We confirm the carrier tape from stock or specify a bespoke tape, plus the cover tape, pitch and reel size.
Components are placed into the pockets in a static and humidity-controlled environment and sealed with cover tape.
Lead position and pitch are checked by 3D inspection, and each reel is labelled to your requirements.
Moisture-sensitive parts are dry packed where the MSL requires it, and reels are despatched or held in secure stock.
How the four common formats compare when parts are going onto an SMT line.
| Tape and reel | Tray | Tube | Cut tape | |
|---|---|---|---|---|
| Best for | Volume SMT production | Larger and fine-pitch parts such as BGA and QFP | Leaded parts and smaller runs | Prototypes and small quantities |
| Machine feeding | Loads directly onto tape feeders | Needs a tray feeder or tray changer | Needs a stick or vibratory feeder | Usually needs a leader spliced on before it will feed |
| Protection | Each part sealed in its own pocket | Good lead protection; some trays can be baked for moisture-sensitive parts | Parts can move against each other in the tube | As tape and reel, but short strips are easy to damage |
| Watch out for | Needs the right carrier tape for the part | Bulky to store and slower to change over | Lead damage and limited automation | Feeder set-up waste on short lengths |
If your parts arrive in trays, tubes or bulk but your line needs reels, we transfer them into tape and reel. Use our reel capacity calculator to estimate parts per reel and reels required.
Most parts fit one of the 500+ carrier tape variants we hold in stock, which keeps lead times short.
If nothing standard fits, we make custom embossed carrier tape to your component specification.
For die-level parts from wafer, film frame or waffle pack, see bare die tape and reel.
| Standard | What it covers |
|---|---|
| EIA-481-D | 8 mm to 200 mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling |
| J-STD-033 | Handling, packing, shipping and use of moisture and reflow sensitive surface mount devices |
| JESD625 | Requirements for handling electrostatic-discharge-sensitive devices |
| IEC 61340-5-1 | Protection of electronic devices from electrostatic phenomena |
| EIA-556-B | Outer shipping container labelling |
| ISO 9001:2015 | Our quality management system, certified by BSI under UKAS accreditation |
A part loaded the wrong way round in the pocket is placed the wrong way round on the board. We agree pin 1 orientation with you before the job starts.
A pocket that is too loose lets parts turn or flip; one that is too tight can damage leads. We match the carrier tape to the part, or make one that fits.
Bent or misaligned leads cause placement and soldering faults. 3D vision checks lead position and pitch as parts are taped.
Moisture-sensitive devices left out too long can crack during reflow. Reels are dry packed to J-STD-033 where the MSL requires it.
Taping runs in a static and humidity-controlled environment to JESD625 and IEC 61340-5-1.
Where parts come from the open market, counterfeit testing can run before taping so suspect parts never reach your feeders.
Everything on one site, from one UK supplier.
Short answers to what buyers usually ask first.
A packaging format for surface mount components. Each part sits in its own pocket in a carrier tape, sealed with a cover tape and wound onto a reel that loads directly onto a pick-and-place feeder.
Carrier tape from 4 mm to 200 mm wide, with component spacing from 2 mm. Standard reels are 7 inch for small components and 13 inch for larger items.
EIA-481-D, the standard for 8 mm to 200 mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling, alongside ISO 9001:2015.
Same-day turnaround is standard, with 24/7 line-stop support when production is waiting. Send your part number, quantity and deadline and we will confirm.
Yes. Bulk components are fed from a bowl feeder, and sensitive leaded components can be taken straight from trays or antistatic tubes.
We hold more than 500 carrier tape variants with access to a further 1,000, and we can make bespoke carrier tape to your component specification.
Yes. Programming, taping and reeling, laser marking and dry packing can all run under one job number.
Yes. We serve electronics manufacturers across the UK and Europe from our Northampton facility. See our European page for delivery, customs and paperwork.
Send the part number, package, quantity and how the parts will arrive, and we will confirm the carrier tape, turnaround and a quote. Line stopped? Call 01604 491107.
Converting, programming, testing, and packaging electronic components for defence, aerospace, automotive, and medical manufacturers since 1992.
Tel: (01604) 491107
info@systemationeuro.com
Systemation Euro Automotive Ltd
19 Mansion Close
Moulton Park Industrial Estate
Northampton
NN3 6RU
England